| Research on high-powered Brazing Diamond Saw for Cutting Vehicle Tyre |
| 關鍵詞： |
Diamond Brazing High-frequency induction Interf |
| 類 別： |
橡膠 >> 橡膠原料 |
| 來 源： |
2009高分子先進制造業論壇（青島） |
| 資料類型： |
pdf文件 |
| 資料大小： |
1428K |
| 簡 介： |
The high-powered brazing diamond saw was developed to cut vehicle tyre
efficiently. The Ti-coated diamond and the uncoated diamond were brazed with NiCr
alloy by high-frequency induction under argon atmosphere at 1020℃ within 10
seconds. The interfacial microstructures between brazed diamond and the filler alloy
were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD) and
energy dispersion spectrometer (EDS). It is surprisedly found that Cr-carbides forms
compactly and normally on the surface of Ti-coated diamond brazed, whereas Crcarbide
forms loosely and tangentially on the surface of uncoated diamond brazed.
The abrade experiment results for the brazed diamonds show that the bond strength
between the Cr-carbide and uncoated diamond brazed is lower than the normally
formed Cr-carbide and the diamond. Furthermore, the cause that Ti changes the
morphology of Cr-carbides on the surface of Ti-coated diamond brazed is discussed
by the further tests that are specially designed. |
| 上傳人： |
chem2000 |
| 上傳時間： |
2009-11-02 17:04:38 |
| 下載次數： |
1 |
| 消耗積分： |
2 |
| 我要收藏： |
 |
| |
友情提示：下載后對該資源進行評論，即可獎勵2分。 |
|
本欄目部分資源來自互聯網，僅為促進數據共享和信息交流，如有版權問題請告知本網或上傳者本人，本網會及時給予答復。 |
| 報告錯誤
1.下載無效
2. 資料明顯無價值
3. 資料重復存在
|
