塑料
INCOE® Introduces AXP Feature Designed to Improve Integration of Long Nozzles
2009-7-20 來源:中國聚合物網
關鍵詞：INCOE NPE
2009-7-20 來源:中國聚合物網
關鍵詞：INCOE NPE
NPE- Chicago IL, USA- INCOE® has developed a new Axial Protected (AXP) feature for longer Direct-Flo™ (DF) Gold hot runner nozzle designs with multiple heating zones. These types of systems are typically used to produce large components with deep nozzle bores in the injection half.
The new AXP feature eliminates the time and expense of adding a separate groove over the entire length of the nozzle bore in order to accommodate heater cables. This aids in reducing manufacturing costs for mold makers. The AXP design uses the same bore diameter that mold makers create for the hot runner nozzle. The heater cables are routed in an axial direction alongside the nozzle heater.
The cable outlet has been changed so that the bore geometry can be reduced and simplified. A conical guide spacer provides clean cable routing that simplifies nozzle installation into the bore. The spacer provides protection to wires and cabling and the diameter is less than the previously required dimension providing reduced nozzle spacing. Fiberglass and silicone sleeves protect the cables against the heating elements.
John Blundy, V.P. Business Development for INCOE® stated, “The AXP design helps mold makers simplify design and reduce manufacturing time. That equates to reduced mold making costs. We continuously look for ways to make system integration easier, and provide solutions that can positively impact our customers’ ability to compete.”
About INCOE® Corporation
Since 1958, INCOE® has engineered productivity built hot runner systems starting with their original patented design of the first commercial hot runner nozzle. Today, a wide range of nozzles and manifolds, pre-wired unitized systems, complete hot halves and advanced control technologies provide optimized systems suitable for appliances, automotive, caps/ closures, electronics, medical disposables, packaging , pharmaceutical and technical markets. A network of representatives in over 35 countries are supported by INCOE® facilities located in the United States, Germany, Brazil, China, Hong Kong and Singapore. Wherever your molding operation is, INCOE® can support your business with complete hot runner systems engineered for your application… Right From The Start.
The new AXP feature eliminates the time and expense of adding a separate groove over the entire length of the nozzle bore in order to accommodate heater cables. This aids in reducing manufacturing costs for mold makers. The AXP design uses the same bore diameter that mold makers create for the hot runner nozzle. The heater cables are routed in an axial direction alongside the nozzle heater.
The cable outlet has been changed so that the bore geometry can be reduced and simplified. A conical guide spacer provides clean cable routing that simplifies nozzle installation into the bore. The spacer provides protection to wires and cabling and the diameter is less than the previously required dimension providing reduced nozzle spacing. Fiberglass and silicone sleeves protect the cables against the heating elements.
John Blundy, V.P. Business Development for INCOE® stated, “The AXP design helps mold makers simplify design and reduce manufacturing time. That equates to reduced mold making costs. We continuously look for ways to make system integration easier, and provide solutions that can positively impact our customers’ ability to compete.”
About INCOE® Corporation
Since 1958, INCOE® has engineered productivity built hot runner systems starting with their original patented design of the first commercial hot runner nozzle. Today, a wide range of nozzles and manifolds, pre-wired unitized systems, complete hot halves and advanced control technologies provide optimized systems suitable for appliances, automotive, caps/ closures, electronics, medical disposables, packaging , pharmaceutical and technical markets. A network of representatives in over 35 countries are supported by INCOE® facilities located in the United States, Germany, Brazil, China, Hong Kong and Singapore. Wherever your molding operation is, INCOE® can support your business with complete hot runner systems engineered for your application… Right From The Start.
注：本網轉載內容均注明出處，轉載是出于傳遞更多信息之目的，并不意味著贊同其觀點或證實其內容的真實性。
（藍劍）
